• TECHNICAL SPECS -SmartAtm

  • Model No

  • SATM - 32IP-CxPxR9-xx

  • Application

  • Intrusion panel, ATM E-surveillance systems

  • CPU

  • 32 Bit RISC ARM Processor

  • Memory

  • Up to 4 MB Flash

  • Events/Transactions

  • 30,000Events/Transactions Storage Capacity

  • Protocol

  • SIA-DC9 or Smart-I Proprietary

  • Display

  • 16 X 2 Alphanumeric display

  • Keypad

  • 4 X 3 Matrix Keypad

  • Weigand (In)

  • Available 1 no. for Pin-pad Reader

  • Communications Port

  • TCP/IP
    RS485-1 for Two way GSM
    RS485-2 for UPS/DG/Energy Meter*
    RS485-3 for Display keypad (Arm/ Disarm)*
    RS232-for UPS integration (Optional)

  • Input (Zone)

  • 32 Nos. (29Nos. Potential free inputs for Sensor input & 3Nos. Default sensor input for smoke detectors, smoke temper & low battery alarm )

  • Output

  • Potential free outputs 9 nos. for EML Lock, Hooter, AC/Signage, router supply etc.

  • Smoke Zone

  • Conventional smoke zone available

  • Low Battery Alarm

  • Available

  • Tamper

  • Available

  • LED

  • Available for Zone status & O/p relay status

  • Sound

  • Beep & Buzzer Sound

  • Power Supply

  • 1) P4: SMPS (AC 230V; ±10%; 50 HZ ), O/p: 13.8V@5A, 7Ah/12Ah Battery back up (for 32IP Standard panel + Two Way GSM + Router + Keypad (Arm & Disarm) + 12V@7Ah Battery) [Suitable for Medium cabinet only]

    2) P5: SMPS (AC 230V; ±10%; 50 HZ ), O/p: 13.8V@6.5A, 12v@12Ah*2 Battery back up – (for 32IP Standard panel + 8 Camera + NVR/DVR + Two Way GSM + Router + Keypad (Arm & Disarm) + EML lock + 12V@12Ah Battery - 2 Nos.) [Suitable for Large Cabinet only]

    3) P6: SMPS (AC 230V; ±10%; 50 HZ ), O/p: 13.8V@8A, 5v@3A, 12v@12Ah*2 Battery back up- ( for 32IP AI panel + 8 Camera + NVR/DVR + Two Way GSM + Router + Keypad (Arm & Disarm) + EML lock panel + 12V@12Ah Battery - 2 Nos.) [Suitable for Large Cabinet only]

    4) P7: SMPS (AC 230V; ±10%; 50 HZ ), O/p: 13.8V@12.5A, 5v@3A, 12v@12Ah*2 Battery back up- ( for 32IP AI panel + 16 Camera + DVR/NVR(16Ch with 2SATA) + Two Way GSM + Router + Keypad (Arm & Disarm) + EML lock + 12V@12Ah Battery - 2 Nos.) [Suitable for Large/Extra Large Cabinet only]

  • Enclosure

  • M- LWH=400mm X 75 mm X 350 mm
    a) MS Powder coated with Lock & Key
    b) Motherboard + AC/Fail PCB or Router + Power Supply+ 12v@7Ah Battery Assembly provision

    M1 - LWH=390mm X 115 mm X 375 mm
    a) MS Powder coated with Lock & Key
    b) Motherboard + AC/Fail PCB+ Power Supply+ Router + 12v@12Ah Battery Assembly provision

    L- LWH =530 mm X 120 mm X 530mm
    a) MS Powder coated with Lock & Key
    b) Motherboard + AC/Fail PCB + Power Supply + Router+ DVR/NVR(up to 16Ch with Single SATA) + AI + Network switch + 12v@12Ah *2Nos Battery Assembly provision

    XL- LWH =530 mm X 120 mm X 530mm
    a) MS Powder coated with Lock & Key
    b) Motherboard + AC/Fail PCB + Power Supply + Router+ DVR/NVR(16Ch with 2SATA) + AI+ Network switch + 12v@12Ah *2Nos Battery Assembly provision

  • Mounting

  • Wall Mounting

  • Operating Temp

  • 0°C to 50°C

  • Humidity

  • 20% to 90%

    • Notes

    Smart I Surveillance will not provide technical support in the following situations:

    • Issues caused by using third-party drives or components not included without prior notice.
    • End-of-Life products.
    • The product has been disassembled without prior authorization from Smart I Surveillance.
    • Issues caused by using non-genuine Smart I Surveillance products, software, or applications.